please read the Mini-howto at:

http://www.linuxvirtualserver.org/Joseph.Mack/mini-HOWTO/LVS-mini-HOWTO.html

Setting up an lvs is easy - but you need to build the example ones first - will get you grounded in the basic principles.

You are unlikely to recieve any help from the list if you have not successfully completed the howto.

jeremy

-----Original Message-----
From: bulbula@itu.edu.tr [mailto:bulbula@itu.edu.tr]
Sent: Thursday, 6 June 2002 9:01 PM
To: lvs-users@LinuxVirtualServer.org
Subject: Please help me

First, I installed Redhat 7.2
then i installed the following RPMs

ipvsadm-1.18-8.i386.rpm
piranha-0.6.0-19.i386.rpm
piranha-0.6.0-19.src.rpm
scsi_reserve-0.7-6.i386.rpm
scsi_reserve-devel-0.7-6.i386.rpm

then i did not do any kernel patch but i have made some configuration via 
piranha-gui...

After that i have started the lvs. ( i use lvs command)

then when i wrote ipvsadm i got the foolowing out : 

[root@lvs root]# ipvsadm
IP Virtual Server version 0.8.1 (size=65536)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port             Forward Weight ActiveConn InActConn
TCP  lvs.cc.itu.edu.tr:http wlc
  -> lvs.cc.itu.edu.tr:http         Local   1      0          0
  -> AONTWS4052.cc.itu.edu.tr:http  Route   1      0          0
[root@lvs root]#

This means that my LVS is running ? 
if so how can implement this to LPRNG ... 

if LVS is not running what i must do for it to run...
Please give me some explanation step by step....

THANKS  :=)
my lvs.cf is this :

---------------------------------------------
serial_no = 44
primary = 160.75.5.141
service = lvs
backup_active = 0
backup = 0.0.0.0
heartbeat = 1
heartbeat_port = 539
keepalive = 6
deadtime = 18
network = direct
nat_nmask = 255.255.255.0
reservation_conflict_action = preempt
debug_level = NONE
virtual lvs {
     active = 1
     address = 160.75.5.141 eth0:1
     vip_nmask = 255.255.255.0
     port = 80
     send = "GET / HTTP/1.0\r\n\r\n"
     expect = "HTTP"
     load_monitor = none
     scheduler = wlc
     protocol = tcp
     timeout = 6
     reentry = 15
     quiesce_server = 0
     server savash {
         address = 160.75.5.52
         active = 1
         weight = 1
     }
     server lvs {
         address = 160.75.5.141
         active = 1
         weight = 1
     }
}

---------------------------------------------

THANKS

-------------------------------------------------
This mail sent through IMP: http://webmail.students.itu.edu.tr/

_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@LinuxVirtualServer.org
Send requests to lvs-users-request@LinuxVirtualServer.org
or go to http://www.in-addr.de/mailman/listinfo/lvs-users